Want to find the best rosin press under 300 dollars? In this post we’ll discuss inexpensive rosin press features, reviews for top brands, and teach you what you need to know to make an informed choice.
For $300 you’ll be getting a manual rosin press machine that requires hand cranking. These are smaller units with less pressing power, so they’re aimed at the casual user looking to process a small amount of material at a time. They can all produce high quality rosin with proper technique, you just won’t get huge yields. They’re also a bit more portable than larger, more pricey heat press machines.
For a manual rosin press with more pressing power and bigger heat plate size, check out the best rosin press under $500. If you are looking for the simplicity of an automated rosin press, find the best rosin presses under $1000.
What to consider when buying a rosin press under $300
The Dabpress 4 ton rosin press can be tilted so the rosin can drip below the plates.They also make a 6 ton with 50% more power.
Even the best rosin press under $300 is going to require a lot of hand-cranking pressure to yield decent returns. There are several methods of achieving the pressure needed in inexpensive presses, including pulling a handle, turning a large crank, or cranking a bottle jack.
Buying a rosin press this cheap will get you a unit meant to process only small amounts of rosin for personal dabbing. The heat plates will be much smaller than with more expensive models. Many times the plates won’t perfectly align. And the reduced pressing power won’t allow you to best maximize returns compared to a more powerful rosin press machine.
If you’re looking to squish a few nugs to dab then an inexpensive rosin press can do the trick. You can still make some high-quality rosin with them — assuming you start with high-quality materials — but they’re best suited for small amounts of material for occasional users.
More serious dabbers or cannabis growers looking to press a large amount of bubble hash, dry ice hash, or dry sift extraction with each run will definitely want to think twice before buying an entry-level model. Unless you want to build up Popeye forearms from repeated cranking for limited returns. It’s like buying a boat – get one that’s too small and you’ll immediately start planning for your upgrade.
Winner: Best rosin press under 300 dollars with twist handle
The Rosineer Grip Twist Heat Press offers 5000+ lbs of force (2.5 tons). Just twist the crank clockwise to tighten. Features include:
3″ x 5″ dual insulated aluminum heat plates with a detachable control box
Uses 825 watts, and the temperature can be set to up to 356 °F.
Dimensions: 15 x 14.4 x 9.2 inches
Comes with an accessory starter kit that includes one silicone collection mat, two stainless steel tools, ten 10″ x 7″ parchment paper sheets, a lidded 3 ml storage jar, and four press magnets.
The machine can be installed with two different configurations. The spreading legs with suction feet can be used to make this press “grip” the table tightly. This is the best setup option if you want to keep the unit portable. At 23 pounds it’s not too heavy to move around, so it’s a good option if you want to take it on the go.
For a sturdier permanent installation the Rosineer Grip Twist rosin press can be assembled without the legs and screwed to a work desk or bench for extra stability. This lets you maximize pressure, since the rotary handle is going to encourage the whole unit to spin when you really crank it hard. It also allows you to mount it on an angle so the rosin can drip out.
The Grip Twist has removable legs so you can screw it to a work bench for more leverage.
The Amazon reviews for this rosin press give it a 4.5 out of 5 stars, out of over 150 reviews. This is one of the highest reviews for rosin presses on the site. It is priced just over $300.
It comes with everything you need to press right out of the box, which is nice for buyers on a budget. It’s shipped in discreet packaging. The Rosineer Grip Twist is definitely one of the best options out there at this price point, and worthy of consideration.
Dabpress 4 Ton Heat Press with Dual 3×5 inch Heated Plates
Winner: Best rosin press around 300
If you’re willing to spend a little over $300 you can ramp up pressure with a Dabpress 4 ton rosin press. This was the first rosin press we bought, and we’ve spent many hours squishing buds and dry sift hash with it. It’s sturdy and delivers a lot of force. Features include:
The Dabpress 4 ton rosin press is solidly built. We smoked rosin made from this press while we wrote this article. So it’s literally highly recommended 🙂
Presses 14 g kief or 10 grams of flower
Solidly built with 6061 aluminum, chrome steel, and a 4 ton bottle jack
Both bottle jack and PID temperature controller can be replaced
Size: 8.7 x 8.3 x 18.1 inches, and weighs 28 pounds
Distance of 1.3″ between upper and bottom heated plates
You need to crank the hell out of the manual bottle jack to increase yields, but the included 4 ton jack does a good job with rosin extractions. You’ll build up Popeye forearms if you keep using it.
The Dabpress 4 ton press has dual heated plates that use 500 watts of power. The temperature settings are pretty close but not perfect. There isn’t a pressure gauge for the bottle jack, but none of the presses in the $300 price range have this. You just need to use it a few times to get the feel of how much pressure to use.
For 50% more force consider the Dabpress 6 ton rosin press, it’s priced under $400 and can press up to 14 grams of material at a time.
Dulytek DM800 Manual Heat Press Machine
Best rosin press under 200 dollars
The Dulytek DM800 Manual Heat Press Machine is an entry-level manual rosin press using a pull handle that is portable and costs around $200. Features include:
2.5″ x 3″ dual heat plates with two-channel controls.
Adjustable maximum pressure, with a pressing force up to 1350 pounds (just over half a ton)
It weighs about 10 pounds, so it’s portable if you want to travel with it
This press also comes in a set with the DM800 press and accessory pack that’s still under $300. This accessory set includes everything you’d need to begin pressing right out of the box:
1.5″ x 1.5″ pre-press,
2″ x 3″ filter bags of 3 mesh sizes (25, 100, and 160 microns, 15 bags total)
4″ x 6″ cold plate
10″ x 7″ pre-cut parchment paper set
6-piece wax tool kit
Non-stick silicone mat
Four press magnets
Dulytek’s product description says it has “Enhanced Mechanical Parts Withstand High Pressure Than Older Versions”.
The temperature settings are located on the back side of the Dulytek DM800 press.
Translation: the old model used to break a lot, much like their translation. The handle is designed to gain leverage by putting a lot of pressure on the bolts, this will remain a likely point of failure after repeated usage.
The Dulytek DM800 rosin press gets a 4.3 rating out of 5 on Amazon. As you would expect when buying a rosin press under $200, it doesn’t have a lot of power or yield a lot. But if you’re looking to get a cheap press that is very portable this option is worth considering.
But be warned — as one reviewer noted, it’s “not really worth buying unless you press very tiny amounts.” Don’t plan on smashing a big pile of kief or hash, it’s best for the occasional user who just wants a few dabs. But it’s certainly better and far more productive than using a hair straightener to make some dabs.
If you want more power at a higher price, consider the Dulytek 5 ton or 7 ton bottle jack presses. They’re better suited to pressing larger amounts.
Kikvape 5 Ton Heat Press Machine
Runner up: Best rosin press under 300 dollars
The Kikvape 5 ton rosin press uses a 5 ton bottle jack that delivers a lot more power than other rosin presses in the $300 price range. That’s 2x the pressing power of the Rosineer Grip Twist press.
The Kikvape rosin press uses a 5-ton hydraulic Big Red bottle jack. It offers more pressing power than other $300 rosin presses.
Dual 250 watt heating cartridges and temperature controllers
Dual heat plates
2 removable leverage bars
12mm thick high strength steel construction; weight 33 lbs
Dimensions: 21 x 12 x 9.5 inches
One big advantage of this unit is the leverage bars. You can install them on top as a support when tilting, or at the bottom front (as pictured) to increase leverage. This lets you crank the plates together with more force than rotary twist presses.
The product description says they use a “Name Brand 5 Tons Jack: The machine equipped with name brand 5 ton hydraulic bottle jacks, don’t worry about the leak of oil. it is also replaceable., No need to worry about after sales.”
The unit allows you to replace the included Big Red jack (although if you need more pressing power you’re probably better at that point to just replace the entire unit and get a stronger frame to handle that added pressure).
The rosin press reviews for this Kikvape 5 ton press are pretty solid at 4.3 out of 5. But some reviewers report issues with temperature settings being inaccurate, and you’ll need to check the plate alignment to make sure things are working ok.
What types of rosin presses are out there for under $300?
In the $300 price range you will see presses with a bottle jack, which are good to deliver lots of pressing power. You also will see hand-cranked manual rosin presses, which have less power but still work to press small amounts.
If you’re looking to press larger amounts, you’ll need to increase heat plate size and pressing power.
All of the rosin presses in the $300 range are capable of squishing some tasty rosin. This press came from the NugSmasher Mini.
You’ll need to spend nearly a thousand dollars to get an automatic press, but those push-button units are helpful if you’re not able to crank enough pressure, if you’re a frequent dabber, or if you are looking to process a bunch of material at once.
Be sure to check seller’s return policy before ordering
Nearly every rosin press under $300 seems to have at least a few negative reviews from users with plate alignment issues, electronics problems, issues during shipping, etc.
Always check a seller’s return policy before you purchase. Some units ship from China and if you need to pay the postage to send back a return for a 40 pound press overseas you will not be amused.
You’ll need to make sure your plates align correctly when you first use your new press, a common complaint among models in this price range is plate alignment which prevents a complete extraction. Also check to make sure your jack maintains pressure, some bottle jacks lose pressure slightly and this will really limit extraction returns.
Chill the rosin on a cold plate or in the freezer after pressing and then collect with a dab tool.
You would think that if you buy a rosin press under $300 that it would be well tested and work correctly out of the box every time. But this isn’t always the case, so make sure that you try your new press right away and use it a lot so that you can identify any problems quickly before the window for returns expires.
If you’re really on a budget consider Dulytek DM800 Heat Presswhich is priced under $200. But if you want a Dulytek you’ll be much happier in the long run with the much sturdier 5 ton Dulytek DHP5 Heat Press.
Looking to buy a rosin press for under $300? Here's what you need to know to find the heat press in that price range, including common features, the best brands, and much more! IT'S DAB TIME!!!
